Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered, a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
|Specifications||D=28.5 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=5/16 inch R=7.9 mm Overall length=64 mm Shank Diameter=1/4 inch|